Bond and Seal Power structural adhesive STRUCADH-KD-POWER-BLACK-CART-300ML Heavy-duty, elastic hybrid structural adhesive Excellent adhesive range and high level of initial strength Very good adhesion to almost all substrates No complex fixing of components Flexible with low elasticity Can be painted over Can be painted over before and after skin formation with all standard paint systems (except alkyd resin varnish). UV-resistant Ideally suited to visible joints. Non-corrosive Prevents metal corrosion. NSF (P1) registered (No. 136996) International approval for use in food-related areas. Virtually odourless, VOC and solvent-free Isocyanate-free, PVC-free and silicone-free Notice Do not bring into contact with synthetic-resin paint systems (alkyd resin). Not suitable for PE, PP, PTFE, silicone rubber, polystyrene and softened plastics. Make sure a minimum adhesive thickness of 3 mm is used to ensure secure bonding. It is essential to use Würth Adhesion Plus products in order to achieve optimum adhesion results. This is especially important with critical surfaces, such as non-ferrous base metals (copper) and galvanised materials. For smoothing, use Würth sealant smoothing agent. Proof of Performance NSF-registered, Class P1, No. 136996 The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Reviews
There are no reviews yet.